15ft Tent Full Wall

Custom 15ft Tent Full Walls for Tampa Events

Turn your 10×15 event tent into a more complete branded environment with a custom-printed full wall. OneStop provides 15ft tent wall printing for Tampa businesses, restaurants, vendors, schools, sports teams, nonprofits, event planners, and outdoor exhibitors.

A full wall creates a large visual background beneath the canopy while adding privacy, defining the booth, and providing more space for logos, menus, sponsor graphics, product images, and promotional messaging.

Long-Side and Short-Side Full Walls

The 10×15 Event Tent requires different wall sizes for its long and short sides. The 15-foot long-side full wall measures 170 inches × 78 inches, while the 10-foot short-side full wall measures 113 inches × 78 inches.

These two wall sizes are not interchangeable. Select the correct installation side and use its matching artwork template when placing your order.

• Long-Side Full Wall: Fits one of the tent’s 15-foot sides.
• Short-Side Full Wall: Fits one of the tent’s 10-foot sides.
• Maximum Configuration: Full walls may be installed on compatible long or short sides as required.

Full-Color Dye-Sublimation Printing

Each wall is produced from 6 oz polyester tent fabric using full-color dye-sublimation printing. The process transfers the artwork into the fabric fibers, creating vivid logos, photographs, gradients, service information, and branded backgrounds without applying a heavy vinyl layer.

The fabric has a water-resistant coating and scratch-resistant printed finish for properly secured temporary outdoor displays. It coordinates with the custom canopy used on OneStop’s compatible 10×15 Event Tent.

Full walls are printed single-sided. Position the printed surface toward the primary customer viewing direction when installing the wall.

Easy Velcro Attachment

Sewn Velcro loops attach the full wall directly to the tent hardware beneath the canopy and along the supporting legs. No separate horizontal support pole or half-wall clamps are required.

When installed correctly, the wall extends to approximately four inches above the floor. This helps reduce contact with dirt, water, and uneven ground while maintaining a large printed presentation.

Create a Branded Event Backdrop

A custom full wall can serve as the primary visual background for merchandise tables, food-service areas, product demonstrations, staff stations, registration counters, interviews, sponsor displays, and event photography.

Multiple full walls can be used to create a more enclosed booth, while combining full and half walls allows you to control customer entry points and divide the tent into different functional areas.

Compatible Short-Side Half Walls

Half walls are available separately for the two 10-foot short sides of the 10×15 Event Tent. A maximum of two half walls can be installed, and half walls are not available for the 15-foot long sides.

Each half wall requires compatible hardware consisting of one telescopic aluminum support pole and two hex clamps. Half walls are available with single-sided or double-sided printing.

Recommended Applications

Custom 15ft Tent Full Walls work well for outdoor festivals, farmers markets, food-service tents, vendor fairs, school events, sporting events, trade shows, fundraising programs, dealership promotions, registration tents, product demonstrations, and mobile retail booths.

Free custom design service is available with qualifying orders. Upload print-ready artwork or request help creating a wall design that coordinates with your tent canopy, flags, table covers, and other event graphics. Precision printing and finishing are included with standard production, so same-day rush service is not required to receive professional-quality results.

Outdoor Safety and Weather Notice

• Install the wall only after the compatible event tent has been fully assembled and secured.
• Adding full walls increases the amount of wind pressure placed on the tent structure.
• Secure every tent leg using suitable stakes, ropes, sandbags, or venue-approved weights.
• Do not use the tent or walls during strong wind, thunderstorms, heavy rain, or severe weather.
• Event tent walls are not structural wind barriers or permanent outdoor enclosures.
• Do not leave the assembled tent and walls unattended outdoors.
• Follow all venue, property, fire-code, and local event requirements.

Care, Storage, and Handling

• Remove all wall graphics before collapsing the event tent frame.
• Allow the fabric to dry completely before folding or storage.
• Keep the printed surface away from sharp objects and abrasive materials.
• Do not pull excessively on the sewn Velcro loops.
• Fold the wall carefully to reduce deep creases.
• Store the fabric in a clean, dry indoor location.

15ft Tent Full Wall Specifications

Features

• Custom full-wall graphic for compatible 10×15 event tents
• Dedicated long-side and short-side sizes
• Full-color dye-sublimation printing
• Weather-resistant coated fabric
• Scratch-resistant printed finish
• Sewn Velcro attachment loops
• Single-sided printing
• No additional support pole required

Material

• 6 oz polyester tent fabric
• 600 × 600 denier construction
• Water-resistant coated surface
• Flexible fabric for temporary event installations

Print

• Full-color dye-sublimation printing
• Single-sided graphic
• Scratch-resistant printed finish
• Suitable for compatible indoor and temporary outdoor event displays

Available Dimensions

Full-Wall Finishing

• Sewn Velcro loops along the upper edge
• Sewn Velcro loops along the sides
• Finished fabric edges
• Extends to approximately four inches above the ground

Full-Wall Hardware

• No separate wall support hardware required
• Attaches directly to compatible 10×15 Event Tent hardware
• Upper loops attach beneath the canopy
• Side loops attach around the tent legs

Related Half-Wall Hardware

• One telescopic aluminum support pole per half wall
• Two compatible hex clamps per half wall
• Half walls fit the two 10-foot short sides only
• A maximum of two half walls may be installed

Recommended Applications

• Farmers markets and vendor fairs
• Food and beverage service tents
• Outdoor festivals and community events
• School and university programs
• Sports and fundraising events
• Trade shows and exhibitions
• Registration and check-in areas
• Product demonstrations
• Branded photography backdrops
• Mobile retail and service booths

Compatibility Notice

These walls are designed for compatible OneStop 10×15 Event Tent hardware. Long-side and short-side walls are not interchangeable. Fit is not guaranteed on third-party frames, even when the listed canopy dimensions appear similar.

Artwork and File Setup Guidelines

• Accepted file formats: PDF or JPEG
• PDF requirements: Submit a single-page PDF for each printed wall
• Color space: CMYK
• Resolution: 150 DPI at full finished size
• Maximum upload size: 300 MB
• Artwork dimensions: Use the exact template for the selected wall type
• Scaled artwork: Do not resize the artboard or alter the template proportions
• Bleed: Follow all bleed, seam, and finishing areas shown in the template
• Crop marks: Do not include crop marks unless specifically requested
• Fonts: Convert all live fonts to outlines
• Colors: Convert Pantone and spot colors to CMYK

Template Downloads

Template Instructions

• Do not adjust the artboard dimensions.
• Do not reposition, resize, or remove required guidelines.
• Place the final design on the layer labeled “Artwork.”
• Delete mask or guide layers only when instructed by the template.
• Keep the original document orientation unchanged.
• Review all seams, Velcro areas, bleed, and safety margins before exporting.

Choose the Correct Wall Template

• Use the long-side template only for the 170-inch-wide full wall.
• Use the short-side template only for the 113-inch-wide full wall.
• Do not resize one template to produce the other wall size.
• Clearly label each submitted file by wall type and installation side.
• Confirm the selected product option matches the uploaded artwork.

Full-Wall Artwork Safety Areas

• Keep logos, text, QR codes, and contact information away from Velcro attachment areas.
• Do not place important details directly against seams or finished edges.
• Account for tables, merchandise, equipment, and guests positioned in front of the wall.
• Keep essential branding visible above typical table height.
• Use the supplied template to confirm the complete visible print area.

15ft Tent Wall Design Tips

• Use a large central logo or primary campaign image.
• Keep the main message readable from outside the event tent.
• Use strong contrast between text and the background.
• Upload vector logos and high-resolution photographs.
• Coordinate the wall artwork with the canopy, flags, and table covers.
• Keep important information above tables and product displays.
• Avoid excessive text across the large wall area.
• Include one clear call to action.

Color and Production Notes

• Convert all artwork to CMYK before uploading.
• Monitor colors may differ from the final dye-sublimated fabric.
• Do not rely on unconverted Pantone or spot colors for exact color matching.
• Fabric texture, seams, and installation tension may slightly affect fine details.
• Colors may appear different in direct sunlight, shade, and indoor lighting.
• Large gradients and photographs should be reviewed for resolution and banding.

15ft Tent Full Wall Installation

1. Secure the tent: Fully assemble and anchor the compatible 10×15 Event Tent before installing the full wall.
2. Confirm the wall size: Verify that the wall matches either the selected 15-foot long side or 10-foot short side.
3. Position the graphic: Place the wall beneath the correct canopy side with the printed surface facing the intended viewing direction.
4. Attach the upper loops: Fasten the sewn Velcro loops to the tent frame directly below the canopy.
5. Secure the sides: Wrap and fasten the side Velcro loops around the corresponding tent legs.
6. Smooth the wall: Adjust the loops until the graphic hangs evenly without excessive stretching.
7. Inspect the installation: Confirm that every attachment point, tent leg, and anchoring component is secure before use.

Related Half-Wall Installation

1. Install the half wall only on one of the two 10-foot short sides.
2. Attach two compatible hex clamps at matching heights on the selected tent legs.
3. Slide the telescopic support pole through the top pole pocket.
4. Connect the pole to both clamps and adjust it evenly.
5. Secure the side Velcro loops around the tent legs.
6. Confirm that the half wall and tent anchoring system are secure.

Frequently Asked Questions

What size full wall do I need for a 10×15 event tent?

Choose the 170-inch × 78-inch wall for a 15-foot long side or the 113-inch × 78-inch wall for a 10-foot short side. The two wall sizes are not interchangeable.

Can the 15ft Tent Full Wall be printed on both sides?

No. Full-height walls are available with single-sided printing only. The printed surface should face the primary customer viewing direction.

Does the full wall require additional hardware?

No separate support pole is required. The full wall attaches directly beneath the canopy and around the tent legs using sewn Velcro loops.

Can I add half walls to the 10×15 event tent?

Yes. Up to two half walls can be installed, one on each 10-foot short side. Half walls are not available for the 15-foot long sides and require compatible support hardware.

Can this wall fit another brand of 10×15 tent?

Compatibility is not guaranteed. Confirm the frame dimensions, leg profile, attachment positions, and finished wall size before ordering for third-party hardware.

Do you offer custom 15ft tent wall printing in Tampa?

Yes. OneStop provides custom 15ft Tent Full Walls for Tampa businesses, restaurants, vendors, schools, festivals, sports teams, trade shows, and community events. Tampa pickup and shipping options depend on the selected wall size and order quantity.