20ft Tent Half Wall

Custom 20ft Tent Half Walls for Tampa Events

Add branding, structure, and a professional service boundary to your compatible 10×20 event tent. OneStop provides custom 20ft tent half wall printing for Tampa businesses, restaurants, vendors, schools, sports teams, nonprofits, event planners, and outdoor exhibitors.

The half-height design helps define your booth while keeping the upper section open for customer interaction, product visibility, food service, registration, and sales conversations.

Designed for the 10-Foot Short Sides

The 20ft Tent Half Wall measures 113 inches wide × 39 inches high and fits one of the two 10-foot short sides of a compatible 10×20 Event Tent.

A maximum of two half walls may be installed on one tent—one on each short side. Half-wall graphics and support hardware are not available for the 20-foot long sides.

Although this product is made for the 20ft Event Tent system, the graphic itself spans the tent’s 10-foot short side. Confirm the tent model, installation side, and hardware compatibility before ordering.

Single-Sided or Double-Sided Printing

Choose single-sided printing when the graphic only needs to face customers outside the tent. Select double-sided printing when branding, menus, instructions, or promotional information should be visible from both the exterior and interior of the booth.

Double-sided orders can use the same design on both sides or different artwork for each viewing direction. Separate exterior and interior files are required.

Full-Color Dye-Sublimated Fabric

The wall is produced from 6 oz polyester tent fabric using full-color dye-sublimation printing. This process transfers color into the fabric fibers, producing vivid logos, photographs, gradients, sponsor graphics, menus, and promotional messages.

The 600 × 600 denier material includes a water-resistant coating and scratch-resistant printed finish for properly secured temporary outdoor events. Weather exposure, installation, handling, and storage conditions affect long-term performance.

Supported Half-Wall Hardware

The top edge includes a pole pocket designed for a compatible telescopic aluminum support pole. Two hex clamps attach the pole between the tent legs, while sewn Velcro loops secure the sides of the graphic to the frame.

The support system helps keep the top edge straight and creates a clean counter-height presentation. Compatible hardware includes:

• One telescopic aluminum support pole
• Two hex clamps designed for compatible aluminum tent legs

Confirm whether the hardware is included with your selected product configuration before ordering.

Create a Modular 10×20 Booth Layout

Install one half wall to establish a branded service counter, booth entrance, or customer boundary. Install two half walls on the short sides to guide traffic while keeping the 20-foot long sides open.

Half walls can also be combined with compatible full walls to create storage areas, staff zones, merchandise sections, branded backdrops, or partially enclosed event displays.

Related Full-Wall Options

Compatible full walls are available separately for both the short and long sides of the 10×20 Event Tent.

• Short-Side Full Wall: 113 inches × 78 inches
• Long-Side Full Wall: 228 inches × 78 inches
• Full-Wall Printing: Single-sided only
• Full-Wall Attachment: Sewn Velcro loops with no support pole required

Long-side and short-side full walls are not interchangeable and require separate artwork templates.

Recommended Event Applications

Custom tent half walls work well for farmers markets, food festivals, vendor fairs, school events, sports programs, outdoor trade shows, registration tents, product demonstrations, dealership promotions, mobile retail, and community events.

Free custom design service is available with qualifying orders. Upload print-ready artwork or request help creating a half-wall design that coordinates with your canopy, full walls, flags, table covers, and other event graphics. Precision printing and finishing are included with standard production, so same-day rush service is not required to receive professional-quality results.

Outdoor Safety and Weather Notice

• Install half walls only after the event tent is fully assembled and securely anchored.
• Adding walls increases wind pressure on the complete tent structure.
• Secure every tent leg with suitable stakes, ropes, sandbags, or venue-approved weights.
• Do not use the tent or walls during strong wind, thunderstorms, heavy rain, or severe weather.
• A half wall is not a structural wind barrier or permanent outdoor enclosure.
• Never leave the assembled tent and wall system unattended outdoors.
• Follow all venue, property, fire-code, and local event requirements.

Care, Storage, and Handling

• Remove the half wall before collapsing the tent frame.
• Allow the fabric to dry completely before folding or storage.
• Keep the printed surface away from sharp objects and abrasive materials.
• Do not force the support pole or overstretch the fabric.
• Do not pull excessively on the sewn Velcro loops.
• Fold the graphic carefully to reduce deep creases.
• Store the fabric and hardware in a clean, dry indoor location.

20ft Tent Half Wall Specifications

Features

• Custom half-wall graphic for compatible 10×20 event tents
• Fits the 10-foot short sides only
• Maximum of two half walls per tent
• Full-color dye-sublimation printing
• Single-sided and double-sided options
• Weather-resistant coated fabric
• Scratch-resistant printed finish
• Top pole pocket
• Sewn side Velcro loops

Material

• 6 oz polyester tent fabric
• 600 × 600 denier construction
• Water-resistant coated surface
• Flexible fabric for temporary event installations

Print Options

• Single-sided full-color printing
• Double-sided full-color printing
• Matching or different artwork may be printed on each side
• Separate exterior and interior artwork files required for double-sided orders

Dimensions

Half-Wall Finishing

• Top pole pocket for compatible support hardware
• Sewn Velcro loops along both sides
• Finished fabric edges
• Designed for counter-height event displays

Compatible Hardware

• One telescopic aluminum support pole
• Two compatible hex clamps
• Hardware attaches between two short-side tent legs

Installation Limits

• Half walls fit the two 10-foot short sides only.
• A maximum of two half walls may be installed.
• No half-wall graphics or hardware are available for the 20-foot long sides.

Recommended Applications

• Food and beverage service counters
• Farmers markets and vendor fairs
• Outdoor festivals and community events
• School and university programs
• Sports and fundraising events
• Trade shows and brand activations
• Registration and information tents
• Product demonstrations
• Mobile retail booths
• Branded entry and exit points

Compatibility Notice

This product is designed for compatible OneStop 10×20 Event Tent hardware. Fit is not guaranteed on third-party frames. Confirm the leg profile, clamp compatibility, support-pole dimensions, and finished wall size before ordering.

Artwork and File Setup Guidelines

• Accepted file formats: PDF or JPEG
• PDF requirements: Submit a single-page PDF for each printed side
• Color space: CMYK
• Resolution: 150 DPI at full finished size
• Maximum upload size: 300 MB
• Artwork dimensions: Use the supplied 20ft Tent Half Wall template
• Scaled artwork: Do not resize the artboard or alter the template proportions
• Bleed: Follow all bleed, seam, and finishing areas shown in the template
• Crop marks: Do not include crop marks unless specifically requested
• Fonts: Convert all live fonts to outlines
• Colors: Convert Pantone and spot colors to CMYK

Template Downloads

Template Instructions

• Do not adjust the artboard dimensions.
• Do not reposition, resize, or remove required guidelines.
• Place the final design on the layer labeled “Artwork.”
• Delete mask or guide layers only when instructed by the template.
• Keep the original document orientation unchanged.
• Review the pole pocket, seams, Velcro areas, bleed, and safety margins before exporting.

Double-Sided Artwork Setup

• Upload the exterior and interior graphics as two separate files.
• Clearly label each file as exterior or interior.
• Use matching dimensions and orientation for both sides.
• Confirm which artwork should face customers outside the tent.
• Do not combine both sides into one multi-page PDF unless specifically requested.

Half-Wall Artwork Safety Areas

• Keep logos, text, QR codes, and contact information away from the top pole pocket.
• Allow sufficient clearance around the sewn side Velcro loops.
• Do not place critical details directly against seams or finished edges.
• Account for tables, merchandise, and equipment positioned in front of the graphic.
• Use the supplied template to confirm the complete visible print area.

Half-Wall Design Tips

• Use a large logo that remains visible above tables and products.
• Keep the primary message short and easy to understand.
• Use strong contrast between text and background colors.
• Upload vector logos and high-resolution photographs.
• Keep QR codes large enough to scan comfortably.
• Coordinate the graphic with the canopy, full walls, flags, and table covers.
• Avoid overcrowding the shorter display area with excessive information.
• Use one clear call to action on each printed side.

Color and Production Notes

• Convert all artwork to CMYK before uploading.
• Monitor colors may differ from the final dye-sublimated fabric.
• Do not rely on unconverted Pantone or spot colors for exact color matching.
• Fabric texture, seams, and installation tension may slightly affect fine details.
• Colors may appear different in direct sunlight, shade, and indoor lighting.
• Exterior and interior graphics may vary slightly on double-sided prints.

20ft Tent Half Wall Installation

1. Secure the tent: Fully assemble and anchor the compatible 10×20 Event Tent before installing the half wall.
2. Choose a short side: Confirm that the wall is being installed on one of the two 10-foot sides.
3. Position the clamps: Attach the two compatible hex clamps at matching heights on the selected tent legs.
4. Insert the pole: Slide the telescopic aluminum support pole through the wall’s top pole pocket.
5. Connect the support pole: Attach each end of the pole to the installed hex clamps.
6. Adjust the width: Extend the pole until the wall is supported evenly without excessive stretching.
7. Secure the sides: Wrap and fasten the sewn Velcro loops around the corresponding tent legs.
8. Inspect the installation: Confirm that the clamps, pole, fabric, tent frame, and anchoring system are secure before use.

Frequently Asked Questions

Where can I install a half wall on the 10×20 Event Tent?

Half walls may be installed only on the two 10-foot short sides. They are not available for the 20-foot long sides.

How many half walls can I install on one 10×20 tent?

You may install a maximum of two half walls—one on each 10-foot short side.

Can the 20ft Tent Half Wall be printed on both sides?

Yes. Single-sided and double-sided printing are available. Double-sided orders require separate exterior and interior artwork files.

Does the half wall require additional hardware?

Yes. Each half wall requires one compatible telescopic support pole and two hex clamps attached to the tent legs. Confirm whether the hardware is included with your selected configuration.

Can I combine half walls with full walls?

Yes. Half walls can be combined with compatible short-side or long-side full walls to create a modular booth layout. Full walls are available with single-sided printing only.

Do you offer custom 20ft tent half wall printing in Tampa?

Yes. OneStop provides custom 20ft Tent Half Walls for Tampa businesses, restaurants, vendors, schools, festivals, sports teams, trade shows, and community events. Tampa pickup and shipping options depend on the print configuration, hardware, and quantity.