Custom Aluminum Sandwich Board sign printing in Tampa for real estate, property, construction, business, directional and long-term indoor or outdoor signage.
- Durable 3mm aluminum composite sign panel
- Two 0.15mm aluminum faces bonded to a polyethylene core
- Full-color direct UV printing
- Protective UV coating with a gloss finish
- Single-sided or double-sided printing available
- Suitable for properly installed long-term indoor or outdoor signage
- Lighter than comparable solid aluminum panels
- Custom sizes from 3″ × 4″ up to 48″ × 96″
- 1/4-inch rounded corners
- Optional 0.25-inch mounting holes
Aluminum Sandwich Board
Custom Aluminum Sandwich Board sign printing in Tampa for real estate, property, construction, business, directional and long-term indoor or outdoor signage.
- Durable 3mm aluminum composite sign panel
- Two 0.15mm aluminum faces bonded to a polyethylene core
- Full-color direct UV printing
- Protective UV coating with a gloss finish
- Single-sided or double-sided printing available
- Suitable for properly installed long-term indoor or outdoor signage
- Lighter than comparable solid aluminum panels
- Custom sizes from 3″ × 4″ up to 48″ × 96″
- 1/4-inch rounded corners
- Optional 0.25-inch mounting holes
Custom Aluminum Composite Signs in Tampa
Durable Aluminum Sandwich Board Sign Panels for Business and Property Use
An Aluminum Sandwich Board is a rigid aluminum composite sign panel made with two thin aluminum faces bonded to a lightweight polyethylene core.
OneStop Design & Print produces custom Aluminum Sandwich Board signs in Tampa for businesses, real estate professionals, property managers, contractors, restaurants, schools, organizations and event planners.
The 3mm composite construction provides a rigid, smooth printable surface that is lighter than a comparable solid aluminum panel while remaining suitable for properly installed long-term indoor and outdoor signage.
Important Product Clarification
This Is a Flat ACM Sign Panel — Not a Folding Sidewalk A-Frame
This product is a flat printed aluminum composite panel.
It does not include a folding sidewalk frame, A-frame stand or freestanding sandwich-board structure.
If the sign needs to stand or hang independently, install it on a compatible frame, post, wall, fence or other mounting system.
3mm Aluminum Composite Construction
Two Aluminum Faces with a Lightweight Polyethylene Core
The panel is 3mm thick, approximately 1/8 inch, and consists of two 0.15mm corrosion-resistant aluminum sheets permanently bonded to a polyethylene core.
This layered construction balances rigidity, strength and manageable weight while providing a smooth surface for full-color printing.
3mm ACM Panel
Approximately 1/8-inch rigid aluminum composite construction.
0.15mm Aluminum
Two corrosion-resistant aluminum faces create a smooth printable surface.
Polyethylene Center
The lightweight core reduces weight compared with many solid aluminum panels.
Printing & Finishing
Direct UV Printing with Protective Gloss Finish
Your artwork is printed directly onto the aluminum face using full-color UV flatbed printing.
UV inks cure directly onto the rigid panel and support logos, photographs, gradients, service information, directional graphics and branded designs.
The printed surface receives a protective UV coating that adds scratch resistance and creates a polished gloss finish.
Single-Sided or Double-Sided
Choose 4/0 or 4/4 Full-Color Printing
Single-Sided Sign
Full-color printing on the front with the reverse side left unprinted.
Double-Sided Sign
Full-color graphics printed on both sides for signs viewed from multiple directions.
Double-sided signs may use the same artwork on both faces or two different designs. Submit clearly labeled front and back artwork when the graphics differ.
Custom Sign Sizes
From Small Identification Panels to 48″ × 96″ Signs
Custom dimensions are available from 3 inches × 4 inches up to 48 inches × 96 inches.
This range supports small identification signs, property notices, real estate panels, business signs, directional graphics, construction notices and large fence or wall displays.
Panels larger than 48 × 38 inches are available for store pickup only. Confirm that an oversized panel can be safely transported before ordering.
Indoor & Outdoor Signage
Built for Properly Installed Long-Term Displays
The aluminum composite panel is waterproof, uses corrosion-resistant aluminum faces and receives UV-safe printed graphics with protective finishing.
It is suitable for properly installed long-term indoor or outdoor signage.
Actual service life depends on installation method, climate, wind exposure, physical impact, cleaning and maintenance.
Finished Panel Options
Rounded Corners and Optional Mounting Holes
1/4-Inch Corner Radius
Panels receive 1/4-inch rounded corners for a cleaner finished appearance and reduced sharpness.
Optional 0.25-Inch Holes
Optional punched holes can be added for compatible screws, bolts, zip ties or other mounting methods.
Mounting hardware is not automatically included unless specifically selected with the order.
Recommended Applications
Aluminum Composite Signs for Property, Business and Directional Use
- Real estate signs
- Property management notices
- Fence signage
- Construction and development signs
- Parking signs
- Directional and wayfinding signs
- Building information signs
- Safety notices
- Storefront identification
- Business wall signs
- Menu panels
- Indoor office displays
Business & Commercial Signage
Use ACM Panels for Clear Long-Term Business Communication
Aluminum composite signs work well for company identification, operating information, directions, parking rules, safety messaging, service information and branded wall displays.
The rigid panel can be mounted to compatible walls, fences, posts, frames or other suitable structures using the appropriate installation hardware.
ACM vs. Solid Aluminum
How Aluminum Composite Differs from Solid Aluminum
| Feature | Aluminum Sandwich Board | Solid Aluminum Panel |
|---|---|---|
| Construction | Two aluminum faces with a polyethylene core | Solid metal construction |
| Thickness | 3mm, approximately 1/8 inch | Varies by panel |
| Weight | Lighter | Typically heavier |
| Surface | Smooth aluminum face | Solid metal surface |
| Recommended Use | Wall, fence, real estate, property and business signs | Applications requiring solid metal construction |
Specifications
Aluminum Sandwich Board Specifications
| Specification | Details |
|---|---|
| Product Type | Flat aluminum composite sign panel |
| Material | Aluminum composite material (ACM) |
| Thickness | 3mm, approximately 1/8 inch |
| Aluminum Faces | Two 0.15mm corrosion-resistant aluminum sheets |
| Core | Lightweight polyethylene |
| Printing | Direct full-color UV printing |
| Protective Finish | UV coating |
| Surface Finish | Gloss |
| Print Options | Single-sided 4/0 or double-sided 4/4 |
| Minimum Size | 3″W × 4″H |
| Maximum Size | 48″W × 96″H |
| Corners | 1/4-inch rounded corners |
| Mounting Holes | Optional 0.25-inch punched holes |
| Environment | Properly installed indoor or outdoor use |
Size Limits
Custom Aluminum Sign Size Range
| Size Option | Dimensions |
|---|---|
| Minimum Size | 3″W × 4″H |
| Maximum Size | 48″W × 96″H |
| Custom Sizes | Available within the minimum and maximum limits |
| Oversized Pickup Rule | Panels larger than 48 × 38 inches are store pickup only |
Print Configuration
Single- and Double-Sided Printing Options
| Print Option | Front | Back | Best For |
|---|---|---|---|
| 4/0 | Full color | Unprinted | Wall signs, fence panels and one-direction displays |
| 4/4 | Full color | Full color | Signs viewed from both directions |
Artwork Requirements
Aluminum Sandwich Board File Setup
| File Requirement | Recommended Setup |
|---|---|
| Accepted Formats | PDF or JPEG |
| PDF Setup | Submit a single-page PDF for each printed side |
| Color Mode | CMYK |
| Resolution | 150 DPI at full finished size |
| Maximum Upload | 300 MB |
| Artwork Dimensions | Build artwork at the exact ordered size whenever possible |
| Scaled Artwork | Maintain correct proportions and clearly identify the scale |
| Bleed | Do not add bleed unless required by a supplied template |
| Crop Marks | Do not include crop marks |
| Fonts | Convert all live fonts to outlines |
| Colors | Convert Pantone and spot colors to CMYK |
Double-Sided Artwork
Prepare Front and Back Graphics Separately
- Upload front and back artwork as two separate files
- Clearly label each file as front or back
- Use identical finished dimensions for both sides
- Submit each graphic in its final viewing orientation
- Do not combine both sides into one multi-page PDF unless specifically requested
- If both sides use the same artwork, clearly note that the design should repeat
Rounded Corner Safety Area
Keep Critical Artwork Away from All Four Corners
- Keep important text and logos away from every corner
- Allow for the standard 1/4-inch rounded corner finish
- Do not place thin borders directly against the panel edges
- Keep QR codes and small contact information inside a safe interior area
Mounting Hole Safety Area
Design Around Optional Punched Holes
- Confirm requested hole size, quantity and placement before production
- Keep important artwork away from punched-hole locations
- Allow clearance for screws, washers, bolts or compatible hardware
- Do not place QR codes, phone numbers or logos directly over mounting positions
Aluminum Sign Design Tips
Create Signage That Reads Clearly at the Intended Distance
Use Large, Clear Text
Choose letter sizes appropriate for the distance from which customers will view the sign.
Improve Visibility
Use strong contrast between important text and the background.
Keep It Short
Use one clear primary message instead of overcrowding the panel.
Use Vector Artwork
Vector logos are preferred when available for sharp large-format reproduction.
Use High Resolution
Low-resolution images may appear soft or pixelated on larger panels.
Make It Readable
Keep phone numbers, URLs and other essential details large enough for the expected viewing distance.
Outdoor Sign Design
Keep Outdoor Messages Bold and Easy to Understand
- Use bold colors and simple graphics
- Avoid long paragraphs and excessive small text
- Use short language for parking, entrance, exit and directional signs
- Place the business name or primary message in the most prominent area
- Test QR codes at the intended viewing and scanning distance
Color & Production Notes
Prepare Artwork for Direct UV Printing
- Convert final artwork to CMYK before uploading
- Monitor colors may differ from the finished UV-printed sign
- Convert Pantone and spot colors to CMYK
- Do not rely on unconverted spot colors for exact matching
- The gloss coating may affect how colors appear under direct lighting
- Very dark artwork should retain sufficient contrast and shadow detail
- Low-resolution images may appear soft or pixelated at larger sizes
Installation
Choose Mounting Hardware for the Panel and Installation Surface
Mounting hardware is not automatically included with this product.
Select fasteners, anchors, washers, bolts, standoffs or other compatible hardware according to the sign dimensions, installation surface and environment.
- Plan the location: Measure and mark the intended sign position.
- Check alignment: Use a level to confirm that the panel will be straight.
- Select fasteners: Choose mounting hardware appropriate for the wall, fence, frame or post system.
- Prepare the surface: Drill and install anchors when required.
- Mount the panel: Secure the sign evenly without overtightening the hardware.
- Inspect the installation: Confirm that every mounting point is secure and the panel does not shift.
Outdoor Installation Safety
Secure Large Panels Against Wind and Movement
- Use all suitable mounting points to distribute pressure across the panel
- Use washers when needed to reduce pull-through around mounting holes
- Do not overtighten screws, bolts or zip ties against the aluminum faces
- Large panels may require additional mounting points or structural support
- Do not install large signs where excessive wind load may affect the panel or structure
- Use corrosion-resistant exterior hardware outdoors
- Inspect mounting hardware after storms or severe weather
Cleaning & Care
Maintain the Printed Aluminum Surface
- Remove loose dirt before wiping the printed surface
- Use a soft cloth with mild soap and water
- Avoid abrasive pads, scrapers and harsh solvents
- Do not pressure wash the sign at close range
- Inspect panel edges, mounting holes and hardware regularly
- Store uninstalled panels flat in a clean, dry location
Tampa Aluminum Composite Sign Printing
Custom Aluminum Sandwich Board Signs in Tampa
OneStop Design & Print provides custom Aluminum Sandwich Board and ACM sign printing for Tampa businesses, contractors, real estate professionals, property managers, restaurants, schools and organizations.
Choose your custom size, single- or double-sided printing and optional mounting holes for property signage, business displays, parking signs, directional panels and long-term indoor or outdoor applications.
Upload print-ready artwork or request design assistance for a clear, professional aluminum composite sign.
Create Durable Rigid Signage for Your Tampa Business
Order a custom Aluminum Sandwich Board for real estate, property, construction, directional, parking or commercial signage.
Frequently Asked Questions
What is an Aluminum Sandwich Board?
It is a rigid aluminum composite sign panel made from two thin aluminum faces permanently bonded to a lightweight polyethylene core. The material is also commonly called ACM or aluminum composite material.
Is this a folding sidewalk sandwich board?
No. This product is a flat printed aluminum composite panel. It does not include a folding A-frame or freestanding sidewalk structure.
How thick is the Aluminum Sandwich Board?
The panel is 3mm thick, approximately 1/8 inch, with two 0.15mm aluminum faces bonded to a polyethylene core.
What sizes are available?
Custom dimensions are available from 3″ × 4″ up to 48″ × 96″. Panels larger than 48 × 38 inches are available for store pickup only.
Can the Aluminum Sandwich Board be printed on both sides?
Yes. Choose 4/4 printing for full-color graphics on both sides. The two sides may use matching artwork or different front and back designs.
What does 4/0 printing mean?
4/0 means full-color printing on the front with the reverse side left unprinted.
Can Aluminum Sandwich Board signs be used outdoors?
Yes. The aluminum composite construction, UV printing and protective coating are suitable for properly installed long-term indoor or outdoor signage. Service life depends on installation, exposure, weather and maintenance.
Are mounting holes available?
Yes. Optional 0.25-inch punched mounting holes are available. Select the quantity and placement according to your intended installation.
Does the sign include mounting hardware?
Mounting hardware is not automatically included unless specifically listed or selected with the order. Use hardware appropriate for the panel size, installation surface and environment.
Is aluminum composite lighter than solid aluminum?
Yes. The polyethylene core reduces panel weight while the aluminum faces provide a rigid printable surface, making the composite construction lighter than many comparable solid aluminum panels.
What are Aluminum Sandwich Board signs commonly used for?
Common applications include real estate signs, property notices, fence signs, business wall signs, construction signage, parking signs, directional graphics, storefront identification and indoor information panels.
Do you offer Aluminum Sandwich Board printing in Tampa?
Yes. OneStop Design & Print provides custom Aluminum Sandwich Board and aluminum composite sign printing for Tampa businesses, contractors, real estate professionals, property managers, schools, restaurants and organizations.
Customer Reviews
Share your experience—leave a review.
Onestop Design & Print
- 2437 S 86th St E, Tampa, FL 33619
- (813) 400‑3327
- sales@onestopdp.com
- Opening Hours: 10:00am - 5:00pm
- 2437 S 86th St E, Tampa, FL 33619
- (813) 400‑3327
- sales@onestopdp.com
- Opening Hours: 10:00am - 5:00pm